Pass4itsure shares a valid F5 201 practice test to help pass the F5 201 exam! The latest F5 201 VCE dumps and F5 201 PDF dumps, Pass4itsure F5 201 exam questions have been updated https://www.pass4itsure.com/201.html (91 Q&As Dumps)
free F5 201 exam pdf dumps https://drive.google.com/file/d/1v7EeiMik_QLUzTOzmjbt-k_dYqmec0_q/view?usp=sharing
Share free F5 201 exam questions – Pass4itsure
Free F5 201 exam pdf dumps download from Google Drive
[q1-q13, free pdf] F5 201 exam pdf dumps https://drive.google.com/file/d/1v7EeiMik_QLUzTOzmjbt-k_dYqmec0_q/view?usp=sharing
Practice F5 201 exam question 1-13
QUESTION 1
Which parameters are set to the same value when a pair of BIG-IP devices are synchronized?
A. host names
B. system clocks
C. profile definitions
D. VLAN failsafe settings
E. MAC masquerade addresses
Correct Answer: C
QUESTION 2
Which is an advantage of terminating SSL communication at the BIGIP rather than the ultimate web server?
A. Terminating SSL at the BIG-IP can eliminate SSL processing at the web servers.
B. Terminating SSL at IP the eliminates BIG all unencrypted traffic from the internal network.
C. Terminating SSL at the BIG-IP eliminates the need to purchase SSL certificates from a certificate authority.
D. Terminating SSL at the BIG-IP eliminates the need to use SSL acceleration hardware anywhere in the network.
Correct Answer: A
QUESTION 3
Assume the bigd daemon fails on the active system. Which three are possible results? (Choose three.)
A. The active system will restart the bigd daemon and continue in active mode.
B. The active system will restart the tmm daemon and continue in active mode.
C. The active system will reboot and the standby system will go into active mode.
D. The active system will failover and the standby system will go into active mode.
E. The active system will continue in active mode but gather member and node state information from the standby
system.
Correct Answer: ACD
QUESTION 4
Which cookie persistence method requires the fewest configuration changes on the web servers to be implemented
correctly?
A. insert
B. rewrite
C. passive
D. session
Correct Answer: A
QUESTION 5
As a part of the Setup Utility, the administrator sets the host name for the BIG IP. What would be the result if the two
systems in a redundant pair were set to the same host name?
A. Host names do not matter in redundant pair communication.
B. In a redundant pair, the two systems will always have the same host name. The parameter is synchronized between
the systems.
C. The first time the systems are synchronized the receiving system will be assigned the same self-IP addresses as the
source system.
D. When the administrator attempts to access the configuration utility using the host name, they will always connect to
the active system.
Correct Answer: C
QUESTION 6
A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at
150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default
states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address
when the associated packet is sent to the pool member?
A. 200.200.1.1
B. 150.150.10.11
C. Floating self IP address on VLAN where the packet leaves the system
D. Floating self IP address on VLAN where the packet arrives on the system
Correct Answer: C
QUESTION 7
What is the purpose of floating self-IP addresses?
A. to define an address that grants administrative access to either system at any time
B. to define an address that allows either system to initiate communication at any time
C. to define an address that allows network devices to route traffic via a single IP address
D. to define an address that gives network devices greater flexibility in choosing a path to forward traffic
Correct Answer: C
QUESTION 8
Which three iRule events are likely to be seen in iRules designed to select a pool for load balancing? (Choose three.)
A. CLIENT_DATA
B. SERVER_DATA
C. HTTP_REQUEST
D. HTTP_RESPONSE
E. CLIENT_ACCEPTED
F. SERVER_SELECTED
G. SERVER_CONNECTED
Correct Answer: ACE
QUESTION 9
If a client\\’s browser does not accept cookies, what occurs when the client connects to a virtual server using cookie
persistence?
A. The connection request is not processed.
B. The connection request is sent to a pology server.
C. The connection request is loadbalanced to an available pool member.
D. The connection request is refused and the client is sent a “server not available” message.
Correct Answer: C
QUESTION 10
A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server
has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of
200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1
sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool
member?
A. 200.200.1.1
B. 150.150.10.11
C. Floating self IP address on VLAN where the packet leaves the system
D. Floating self IP address on VLAN where the packet arrives on the system
Correct Answer: B
QUESTION 11
A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to
a pool of web servers. The HTTP based monitor is working in all cases. The ICMP monitor is failing for 2 of
the pool member 5 nodes.
All other settings are default. What is the status of the monitor is working in all cases?
A. All pool members are up since the HTTPbased monitor is successful.
B. All pool members are down since the ICMPbased monitor is failing in some cases.
C. The pool members whose nodes are failing the ICMPbased monitor will be marked disabled.
D. The pool members whose nodes are failing the ICMPbased monitor will be marked unavailable.
Correct Answer: D
QUESTION 12
The current status of a given pool is offline (red). Which condition could explain that state? Assume the descriptions
below include all monitors assigned for each scenario.
A. No monitors are currently assigned to any pool, member or node.
B. The pool has a monitor assigned to it, and none of the pool members passed the test.
C. The pool has a monitor assigned to it, and only some of the pool\\’s members passed the test.
D. A monitor is assigned to all nodes and all nodes have passed the test. The pool\\’s members have no specific
monitor assigned to them.
Correct Answer: B
QUESTION 13
Which three methods can be used for initial access to a BIG-IP system? (Choose three.)
A. CLI access to the serial console port
B. SSH access to the management port
C. SSH access to any of the switch ports
D. HTTP access to the management port
E. HTTP access to any of the switch ports
F. HTTPS access to the management port
G. HTTPS access to any of the switch ports
Correct Answer: ABF
Free Share F5 Certification 101 Practice Test Questions https://www.actual4tests.com/free-pass4itsure-new-f5-101-practice-test-questions-and-answers-update/
The last sentence:
Latest update Pass4itsure F5 201 exam dumps: https://www.pass4itsure.com/201.html
Free F5 201 pdf dumps: https://drive.google.com/file/d/1v7EeiMik_QLUzTOzmjbt-k_dYqmec0_q/view?usp=sharing
The latest F5 201 exam questions can help you pass the exam! Trust Pass4itsure to help you pass the exam 100%!