Where to get actual valid CCNA 200-301 dumps?

Pass4itsure CCNA 200-301 dumps contain 1297 latest exam questions and answers, edited by a professional team, and participate in the actual scene verification to prove that it is actually effective!

Candidates can choose PDF and VCE to practice CCNA 200-301 dumps in any format: https://www.pass4itsure.com/200-301.html. Use 3-5 days to complete the practice objectives to ensure that you successfully obtain the CCNA certification.

Practice the latest CCNA 200-301 dumps exam questions online

FromNumber of exam questionsAssociated certificationType
Question 1:

Several new coverage cells are required to improve the Wi-Fi network of an organization. Which two standard designs are recommended? (Choose two.)

A. 5GHz provides increased network capacity with up to 23 nonoverlapping channels.

B. 5GHz channel selection requires an autonomous access point.

C. Cells that overlap one another are configured to use nonoverlapping channels.

D. Adjacent cells with overlapping channels use a repeater access point.

E. For maximum throughput, the WLC is configured to dynamically set adjacent access points to the same channel.

Correct Answer: AC

A. The 5GHz frequency band provides increased network capacity because it has more nonoverlapping channels available than the 2.4GHz frequency band. This allows for more devices to connect to the network and increases the overall capacity of the network.

C. When designing a wireless network, it is important to ensure that cells (coverage areas) do not overlap with one another. If cells overlap, it can cause interference and negatively impact the performance of the network. To prevent this, cells that overlap should be configured to use nonoverlapping channels. This allows the devices in those cells to communicate without interfering with each other.

B, D, and E options are not the standard design for coverage cells, the selection of channel depends on the environment, and it\’s not a requirement to have an autonomous access point, repeater access point, or dynamic channel selection.

Question 2:

Which cloud service model does the engineer recommend?

A. infrastructure-as-a-service

B. platform-as-a-service

C. business process as service to support different types of service

D. software-as-a-service

Correct Answer: D

The cloud service model that the network engineer would recommend for employees to avoid wasting time installing, managing, and updating software that is only used occasionally is “software-as-a-service” (SaaS).

Question 3:

How does HSRP provide first-hop redundancy?

A. It load-balances Layer 2 traffic along the path by flooding traffic out all interfaces configured with the same VLAN.

B. It uses a shared virtual MAC and a virtual IP address to a group of routers that serve as the default gateway for hosts on a LAN.

C. It forwards multiple packets to the same destination over different routed links in the data path.

D. It load-balances traffic by assigning the same metric value to more than one route to the same destination in the IP routing table.

Correct Answer: B

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-mgo.html

Question 4:

Which IPv6 address type provides communication between subnets and is unable to route on the Internet?

A. global unicast

B. unique local

C. link-local

D. multicast

Correct Answer: B

Question 5:

Refer to the exhibit. An administrator configures four switches for local authentication using passwords that are stored as a cryptographic hash. The four switches must also support SSH access for administrators to manage the network infrastructure. Which switch is configured correctly to meet these requirements?

latest CCNA 200-301 dumps exam questions 5

A. SW1

B. SW2

C. SW3

D. SW4

Correct Answer: C

Question 6:

Which unified access point mode continues to serve wireless clients after losing connectivity to the Cisco Wireless LAN Controller?

A. local

B. mesh

C. flex connect

D. sniffer

Correct Answer: C

In previous releases, whenever a FlexConnect access point disassociates from a controller, it moves to the standalone mode. The clients that are centrally switched are disassociated. However, the FlexConnect access point continues to serve locally switched clients.

When the FlexConnect access point rejoins the controller (or a standby controller), all clients are disconnected and authenticated again.

This functionality has been enhanced and the connection between the clients and the FlexConnect access points is maintained intact and the clients experience seamless connectivity.

When both the access point and the controller have the same configuration, the connection between the clients and APs is maintained.

Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/flexconnect.html

Question 7:


Drag and drop the QoS congestion management terms from the left onto the description on the right.

Select and Place:

latest CCNA 200-301 dumps exam questions 7

Correct Answer:

latest CCNA 200-301 dumps exam questions 7-1

CBWGQ: provides guaranteed bandwidth to a specified class of traffic CQ: services a specified number of bytes in one queue before continuing to the next queue FIFO: uses store-and-forward queuing PQ: places packets into one of four priority-based queues WFQ: provides minimum guaranteed bandwidth to one or more flows

Question 8:

What are two characteristics of a small office/home office connection environment? (Choose two.)

A. It requires 10Gb ports on all uplinks.

B. It supports between 50 and 100 users.

C. It supports between 1 and 50 users.

D. It requires a core, distribution, and access layer architecture.

E. A router port connects to a broadband connection.

Correct Answer: CE

Question 9:

Refer to my exhibit. Which action is taken by the router when a packet is sourced from and destined for

latest CCNA 200-301 dumps exam questions 9

A. It uses a route that is similar to the destination address

B. It discards the packets.

C. It floods packets to all learned next hops.

D. It Queues the packets waiting for the route to be learned.

Correct Answer: B

Referring to the routing table, supports the network from

The Gateway of last resort is not set

So traffic destined for will be discarded.

Question 10:

Refer to the exhibit. Router R1 is running three different routing protocols. Which route characteristic is used by the router to forward the packet that it receives for destination IP

latest CCNA 200-301 dumps exam questions 10

A. longest prefix

B. administrative distance

C. cost

D. metric

Correct Answer: A


Question 11:

A wireless administrator has configured a WLAN; however, the clients need access to a less congested 5-GHz network for their voice quality. What action must be taken to meet the requirement?

A. enable AAA override

B. enable RX-SOP

C. enable DTIM

D. enable Band Select

Correct Answer: D

Ref: Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Gibraltar 16.12.x Information About Configuring Band Selection, 802.11 Bands, and Parameters Band Select enables client radios that are capable of dual-band (2.4 and 5-GHz) operations to move to a less congested 5-GHz access point. The 2.4-GHz band is often congested.

Clients on this band typically experience interference from Bluetooth devices, microwave ovens, and cordless phones as well as co-channel interference from other access points because of the 802.11b/g limit of 3 nonoverlapping channels. To prevent these sources of interference and improve overall network performance, configure band selection on the device.

Question 12:

Refer to the exhibit.

latest CCNA 200-301 dumps exam questions 12

A network engineer must update the configuring on switch2 so that it sends LLDP packets.

latest CCNA 200-301 dumps exam questions 12-1

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: C

Question 13:

What are two port types used by a Cisco WLC for out-of-band management? (Choose two.)

A. service

B. console

C. management

D. distribution system

E. redundant

Correct Answer: AB

Question 14:

Refer to the exhibit.

latest CCNA 200-301 dumps exam questions 14

What is the next hop address for traffic that is destined to host

A. Loopback 0




Correct Answer: C

/32 prefix represents a host, and this is the highest you can get with ipv4. The next hop is as you can see where it says \’via\’.

Question 15:

Which action is taken by the switch port enabled for PoE power classification override?

A. If a monitored port exceeds the maximum administrative value for power, the port is shut down and err-disabled.

B. When a powered device begins drawing power from a PoE switch port, a syslog message is generated.

C. As power usage on a PoE switch port is checked, data flow to the connected device is temporarily paused.

D. If a switch determines that a device is using less than the minimum configured power, it assumes the device has failed and disconnects it.

Correct Answer: A

PoE monitoring and policing compares the power consumption on ports with the administrative maximum value (either a configured maximum value or the port\’s default value). If the power consumption on a monitored port exceeds the administrative maximum value, the following actions occur:

-A Syslog message is issued.

The monitored port is shut down and error-disabled.

The allocated power is freed.

Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/power_over_ethernet.pdf

Download 1297 latest CCNA 200-301 exam questions and answers: https://www.pass4itsure.com/200-301.html (PDF+VCE)

Candidates can choose PDF or VCE to download Pass4itsure CCNA 200-301 dumps according to their own learning habits: https://www.pass4itsure.com/200-301.html, complete the target practice within 3-5 days, and then they can participate in the actual scene Verified.

The complete CCNA 200-301 dumps contain 1297 exam questions and answers, don’t give up halfway! Every exam question is verified by practice, really true and effective can help you pass the exam successfully!