Use F5 201 Exam Dumps As The Best TMOS Administration Exam Study Material

TMOS Administration Exam Study Material

How to achieve success with the F5 201 exam? We all know that this is very difficult. This is not impossible. Using the updated F5 201 exam dumps as the best TMOS Administration exam study material will be able to do so.

This post will show you how to cash in on the F5 201 exam method easily.

The F5 201 exam dumps are study material specifically for the TMOS Administration exam. Download the latest F5 201 exam dumps provided by Pass4itSure to be the best solution for the exam, go to the webpage to get the real F5 201 exam questions.

What information do I need to prepare for the F5 201 exam?

Supplier: F5
Exam Code: 201
Certification: F5 Certified BIG-IP Administrator (F5-CA)
Exam Title: TMOS Administration
Version: V11.4
Best Study Material: Pass4itSure F5 201 Exam Dumps

Examination content:

Section 1: Troubleshoot basic virtual server connectivity issues
Section 2: Troubleshoot basic hardware issues
Section 3: Troubleshoot basic performance issues
Section 4: Troubleshoot basic device management connectivity issues
Section 5: Open a support ticket with F5
Section 6: Identify and report current device status
Section 7: Maintain system configuration
Section 8: Manage existing system and application service

The 201-TMOS Administration exam is the second exam required to gain certification as an F5 BIG-IP administrator.

How to efficiently prepare for the F5 201 exam?

Using Pass4itSure F5 201 exam dumps is the best option to prepare for the TMOS Administration exam and guarantee you a successful F5 201 exam.

What you need to do is practice the F5 201 exam questions. The more practical experience you have, the better you will be able to pass the F5 201 exam.

Where can find free F5 201 – TMOS Administration exam study materials?

Free F5 201 exam questions and free F5 201 exam dumps downloads are available here.

Download free F5 201 exam dumps:

F5 201 Free Exam Dumps Questions Answers


When using the setup utility to configure a redundant pair, you are asked to provide a “Failover Peer IP”. Which address is this?

A. an address of the other system in its management network
B. an address of the other system in a redundant pair configuration
C. an address on the current system used to listen for failover messages from the partner BIG-IP
D. an address on the current system used to initiate mirroring and network failover heartbeat messages

Correct Answer: B


A BIG-IP has two load balancing virtual servers at and The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at set for a source address range of /

All other settings are at their default states. If a client with the IP address sends a request to, what is the source IP address when the associated packet is sent to the pool member?

C. Floating self IP address on VLAN where the packet leaves the system
D. Floating self IP address on VLAN where the packet arrives on the system

Correct Answer: B


What is the purpose of MAC masquerading?

A. to prevent ARP cache errors
B. to minimize ARP entries on routers
C. to minimize connection loss due to ARP cache refresh delays
D. to allow both BIGIP devices to simultaneously use the same MAC address

Correct Answer: C


As a part of the Setup Utility, the administrator sets the host name for the BIG IP. What would be the result if the two systems in a redundant pair were set to the same host name?

A. Host names do not matter in redundant pair communication.
B. In a redundant pair, the two systems will always have the same host name. The parameter is synchronized between the systems.
C. The first time the systems are synchronized the receiving system will be assigned the same self-IP addresses as the source system.
D. When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.

Correct Answer: C


Assuming that systems are synchronized, which action could take place if the fail over cable is connected correctly and working properly, but the systems cannot communicate over the network due to external network problems?

A. If network failover is enabled, the standby system will assume the active mode.
B. Whether or not network failover is enabled, the standby system will stay in standby mode.
C. Whether or not network failover is enabled, the standby system will assume the active mode.
D. If network failover is enabled, the standby system will go into active mode but only until the network recovers.

Correct Answer: B


Which must be sent to the license server to generate a new license?

A. the system\\’s dossier
B. the system\\’s host name
C. the system\\’s base license
D. the system\\’s purchase order number

Correct Answer: A


Which statement accurately describes the difference between two loadbalancing modes specified as “member” and “node”?

A. There is no difference; the two terms are referenced for backward compatibility purposes.
B. When the loadbalancing choice references “node”, priority group activation is unavailable.
C. Loadbalancing options referencing “nodes” are available only when the pool members are defined for the “any” port.
D. When the loadbalancing choice references “node”, the addresses\’ parameters are used to make the loadbalancing choice rather than the member\’s parameters.

Correct Answer: B


A site needs to terminate client HTTPS traffic at the BIG-IP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server? (Choose two.)

D. ClientSSL
E. ServerSSL

Correct Answer: AD


When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?

A. Synching should not be performed.
B. The first system to be updated will assume the Active role.
C. This is not possible since both systems are updated simultaneously.
D. The older system will issue SNMP traps indicating a communication error with the partner.

Correct Answer: A


You need to terminate client SSL traffic at the BIG-IP and also to persist client traffic to the same pool member based on a BIG IP supplied cookie. Which four are profiles that would normally be included in the virtual server\’s definition? (Choose four.)

D. ClientSSL
E. ServerSSL
F. CookieBased Persistence

Correct Answer: ABDF


Which three statements describe a characteristic of profiles? (Choose three.)

A. Default profiles cannot be created or deleted.
B. Custom profiles are always based on a parent profile.
C. A profile can be a child of one profile and a parent of another.
D. All changes to parent profiles are propagated to their child profiles.
E. While most virtual servers have at least one profile associated with them, it is not required.

Correct Answer: ABC


Which two can be a part of a pool\\’s definition? (Choose two.)

A. rule(s)
B. profile(s)
C. monitor(s)
D. persistence type
E. loadbalancing mode

Correct Answer: CE


Which statement is true concerning cookie persistence?

A. Cookie persistence allows persistence independent of IP addresses.
B. Cookie persistence allows persistence even if the data are encrypted from client to pool member.
C. Cookie persistence uses a cookie that stores the virtual server, pool name, and member IP address in clear text.
D. If a client\’s browser accepts cookies, cookie persistence will always cause a cookie to be written to the client\’s file system.

Correct Answer: A

Full F5-CA 201 exam dumps questions, here.