Pass4itsure - The Most Professional Provider of All IT Exam Dumps. Pass All the IT Certifications Exam Easily.

Study hard and improve yourself with ease

Get the Cisco CCDP 300-115 Certification Exam. “Implementing Cisco IP Switched Networks (SWITCH)”: https://www.pass4itsure.com/300-115.html (Q&As: 1067). Free Cisco CCDP 300-115 exam practice test. Improve your skills and exam experience!

Get the latest Cisco CCDP 300-115 pdf

[PDF] Free Cisco 300-115 pdf dumps download from Google Drive: https://drive.google.com/open?id=1iJo8xq0fwezt2DBP_98zRwiZn9fUSWxq

Related Cisco CCDP Exam pdf

• [PDF] Free Cisco 300-101 pdf dumps download from Google Drive: https://drive.google.com/open?id=19C24YYoGC1AAV3BrD8usFw0EjWzxATNR
• [PDF] Free Cisco 300-320 pdf dumps download from Google Drive: https://drive.google.com/open?id=1uRVZs3xFrenG9HR0t2apjT7rA8y9AULY

Valid information provided by Cisco officials

300-115 SWITCH – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/switch2.html

The latest Cisco CCDP 300-115 exam practice questions test your strength

QUESTION 1
Which two commands is used to remove VLAN 55 from the trunk port? (Choose two.)
A. switchport trunk allowed vlan add 3, remove 55
B. switchport trunk allowed vlan remove 55
C. switchport trunk allowed vlan except 55
Correct Answer: BC

QUESTION 2
It a switch stack is configured to used SDM templates, where are the templates stored?
A. stack master
B. TFTP server
C. flash memory
D. all stack members
Correct Answer: A

QUESTION 3
Which option is the minimum frame size for an 802.1Q frame?
A. 64 bytes
B. 68 bytes
C. 1518 bytes
D. 1522 bytes
Correct Answer: B

QUESTION 4
A question with two VRRP routers and there is an IP reachability
A. When R1 lose route to 10.x.x.x then R2 will take mastership because it will be decrement of 20 the priority of R1 is
110
Correct Answer: A

QUESTION 5
A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN
template. The SDM template is causing the CPU of the switch to spike during peak working hours. What is the root
cause of this issue?
A. The VLAN receives additional frames from neighboring switches.
B. The SDM VLAN template causes the MAC address-table to overflow.
C. The VLAN template disables routing in hardware.
D. The switch needs to be rebooted before the SDM template takes effect.
Correct Answer: C
SDM Template Notes:
All templates are predefined. There is no way to edit template category individual values.
The switch reload is required to use a new SDM template.
The ACL merge algorithm, as opposed to the original access control entries (ACEs) configured by the user, generate
the number of TCAM entries listed for security and QoS ACEs. The first eight lines (up to Security ACEs) represent
approximate hardware boundaries set when a template is used. If the boundary is exceeded, all processing overflow is
sent to the CPU which can have a major impact on the performance of the switch. Choosing the VLAN template will
actually disable routing (number of entry for unicast or multicast route is zero) in hardware. Reference:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/44921-swdatabase-3750ss-44921.html

QUESTION 6
which mechanism is specific for RSPAN and not for SPAN?
A. source port
B. monitor port
C. reflector port
D. redundant port
E. destination port
Correct Answer: C

QUESTION 7
Refer to the exhibit. An engineer entered the no spanning-tree bpduguard enable on interface Fa1/0/7 command. Which
statement describes the effect of thiscommand?